Oil coolers series МТ
- List of produced oil coolers series МП;
- Basic standards for water;
- Climatic versions and category of placing;
- Reference designation of cooler type by order;
Oil cooler series МТ-45 is meant for cooling of turbine oil.
The material of heat-exchanging pipes is a tube bundle, in standard design it is made of stainless steel 12Х18Н10Т GOST 5632-72. Depending on the design and operating conditions, the pipe system can be made of 08Х18Н10Т, a copper-nickel alloy MnZh 5-1 and a nickel-silver grade MNZhMts 30.
List of produced oil coolers series МП:
Type and reference designation | Cooling surface, m2 | Water discharge, m3/h | Entering water temperature, С° | Oil temperature, °С | Working pressure, MPa, (kgf/сm2) |
Hydrodynamic resistance, kPa(kgf/сm2) | Mass, max, kg | |||
Input | Output | Oil | Water | Oil | Water | |||||
МТ-45 | 45 | 26 | 33 | 55 | 45 | 1,0 | 0,5 | 0,025 | 0,04 | 1100 |
Basic standards for water:
Characteristics | Sort of water and reference designation | |||||||||
Fresh water | Mineralized water | Sea water | ||||||||
ПВ | МВ1 | МВ2 | МВ3 | МВ4 | МВ5 | МВ6 | МВ7 | МВ8 | ||
Reference designation of cooler version depending on sort of cooling water | ||||||||||
Н | М | М2 | М5, СМ | |||||||
Salt content in water, mg/l |
0…300 | 300…1500 | 1500…3000 | 3000…5000 | 5000…15000 | >15000 | ||||
Type of contamination | runoff, mg/l | ≤1 | - | ≤1 | - | |||||
suspensions, mg/l |
- | ≤23 | ≤50 | - | ≤25 | - | Abrasive contaminants ≤25 |
- |
Note:
Runoff – total content of ammonia, hydrogen sulfides, nitrites etc.
Suspensions – fractions of mineral and organic origin (mechanical impurities).
For water МВ2, МВ3, МВ4, МВ5 – content of chlorides has not to be more than 2000 mg/l regardless of the total salt content.
Climatic versions and category of placing:
УХЛ - for macroclimate areas with moderate and frigid climate.
Т - for all macroclimate areas overland, except the macroclimate area with very frigid climate (general climatic version).
4 - for use in spaces (contents) with artificial regulation of climatic conditions (in enclosed heated or cooled spaces).
Reference designation of cooler type by order:
МТ-45, (ТКЛУ.065179.205), ТУ 3113-002-76242415-2015, where:
МТ – series of oil cooler;
45 - cooling surface, m2;
ТКЛУ.065179.205 - designation of main engineering document.
Besides above-listed types of the oil coolers, we design and produce the oil coolers by specification of the customer.