Oil coolers series Ц
- List of produced oil coolers;
- Basic standards for water;
- Climatic versions and category of placing;
- Reference designation of cooler type by order;
Oil coolers are manufactured in climatic versions of УХЛ and O, the category of placing is 3 or 4 according to GOST 15150-69.
Technical characteristics, overall and mounting dimensions of oil coolers are agreed by order.
Suggested list of produced oil coolers (without specifying the conditional designation of water and climatic version):
Type and reference designation of oil cooler | Basic parameters | ||||||||||
Heat flow no less than, kW | Oil discharge, m3/h | Water discharge, m3/h | Entering water temperature, С° | Overtemperature of oil over entering water, С° | Hydrodynamic resistance, kPa(kgf/сm2) | Working pressure, MPa(kgf/сm2) |
Mass, max, kg |
||||
УХЛ4 | Т4 | oil | water | oil | water | ||||||
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
Ц–63/900 | 63 | 16 | 10 | 25 | 40 | 40 | 6,0 (0,06) | 4,0 (0,04) | 0,4 (4,0) | 0,3 (3,0) | 162 |
Ц–100/1100 | 100 | 25 | 10 | 25 | 40 | 40 | 20,0 (0,20) | 5,0 (0,05) | 0,4 (4,0) | 0,3 (3,0) | 178 |
Ц–160/1250 | 160 | 50 | 20 | 25 | 40 | 40 | 70,0 (0,70) | 9,0 (0,09) | 0,4 (4,0) | 0,3 (3,0) | 196 |
Ц–200/1500 | 200 | 60 | 20 | 25 | 40 | 40 | 80 (0,80) | 1,2 (0,12) | 0,4 (4,0) | 0,3 (3,0) | 190 |
Ц–400/1250 | 400 | 100 | 35 | 25 | 40 | 40 | 100 (1,0) | 25,0 (0,25) | 0,4 (4,0) | 0,3 (3,0) | 310 |
Basic standards for water:
Characteristics | Sort of water and reference designation | |||||||||
Fresh water | Mineralized water | Sea water | ||||||||
ПВ | МВ1 | МВ2 | МВ3 | МВ4 | МВ5 | МВ6 | МВ7 | МВ8 | ||
Reference designation of cooler version depending on sort of cooling water | ||||||||||
Н | М | М2 | М5, СМ | |||||||
Salt content in water, mg/l |
0…300 | 300…1500 | 1500…3000 | 3000…5000 | 5000…15000 | >15000 | ||||
Type of contamination | runoff, mg/l | ≤1 | - | ≤1 | - | |||||
suspensions, mg/l |
- | ≤23 | ≤50 | - | ≤25 | - | Abrasive contaminants ≤25 |
- |
Note:
Runoff – total content of ammonia, hydrogen sulfides, nitrites etc.
Suspensions – fractions of mineral and organic origin (mechanical impurities).
For water МВ2, МВ3, МВ4, МВ5 – content of chlorides has not to be more than 2000 mg/l regardless of the total salt content.
Climatic versions and category of placing:
УХЛ - for macroclimate areas with moderate and frigid climate.
Т - for all macroclimate areas overland, except the macroclimate area with very frigid climate (general climatic version).
4 - for use in spaces (contents) with artificial regulation of climatic conditions (in enclosed heated or cooled spaces).
Reference designation of cooler type by order:
Ц-160/1250-Н-УХЛ4, (ТКЛУ.065179.205), ТУ 3113-002-76242415-2015, where:
Ц – series of oil cooler;
160 - Heat flow, kW;
1250 – distance between pipe walls, mm;
Н - cooling version depending on the characteristics of the cooling water;
УХЛ - climatic version according to GOST 15150-69;
4 - category of placing according to GOST 15150-69;
ТКЛУ.065179.205 - designation of main engineering document.
Example of product recording by export deliveries to the countries with moderate climate:
Ц-160/1250-Н-УХЛ4 эксп., (ТКЛУ.065179.205-02), ТУ 3113-002-76242415-2015.
Example of product recording by export deliveries to the countries with tropical climate:
Ц-160/1250-Н-Т4 эксп, (ТКЛУ.065179.205-04), ТУ 3113-002-76242415-2015.
Besides above-listed types of the oil coolers, we design and produce the oil coolers by specification of the customer.