Home \ Motors with integral gearbox \ Toothed vertical planetary gear motors, type МРВ

Toothed vertical planetary gear motors, type МРВ

main performance specifications
overall and fitting dimensions
reference designation of the gear motor by order

Selling gears

Main performance specifications

Standard size of the gear motor	Reduction ratio u	Output shaft speed, r/min	*Мт, Nm**	Mass of the gear motor, kg	Р, kW
МРВ02	4.0, 5.07, 7.8, 16.7, 26.4, 55.8	25, 56, 85, 180, 280, 355	18-39	10-20	0.12-0.75
МРВ04	16.7, 26.4, 39.6, 59.4	25, 37.5, 56, 85	46-76	16-26	0.25-0.75

Overall and fitting dimensions

Standard size of the gear motor	D	D₁	D₂	D₃	d	d₁	H	H₁
Standard size of the gear motor	mm
МРВ02	80	110	130	150	18	11	405-455	60
МРВ04	110	150	170	198	22	11	400-510	80

Reference designation of the gear motor by order:

Gear motor МРВ02 - 7.8 - 0.75/ 180 - У3, 380В, where:

МРВ02 - Type of the gear motor;
7.8 - Reduction ratio;
0.75 - Capacity of electric motor, kW;
180 - Output shaft speed, r/min;
У3 - Climatic version and category of placing according to GOST 15150-69;
380В - Rated voltage of ac network.

Note
The installation of gear motors, type МРВ is performed only the output shaft down.
The gear motors, type МРВ are produced with the electric motors of line АИР, 4А.